Chamfer Stop

Product Info

Always striving to give you more choices, Trim-Tex introduces Chamfer Stop, the perfect complement to Chamfer Bead. Just like our 3/4" R. J Round, Chamfer Stop is designed to be installed after the drywall. There is no need to wrap the bead behind the drywall.
Use Chamfer Stop for creating beautiful multilayer drywall effects as shown below. Instead of wood moldings, Chamfer Stop is perfect for finishing windows and doors. See the beautiful window detail to the right. If you can imagine it, Chamfer Stop can help you create it.

Installation Instructions

To use Chamfer Bead, drywall must be set back as shown to the right. Dry fit the bead for length. For two way 90º and 135º intersections, use our #0943 Chamfer Marker. For instructions on how to use the Chamfer Marker Click Here. For 3 way intersections, use our #0940 Chamfer 3 Way Outside Corner. You can also cut the parts to fit any angle with a miter saw. Reverse the plywood blade on your saw for a clean cut.
Basic Method: Staple mud leg of the bead every 6-10" with 1/2" long divergent staples.
Superior Method: Liberally apply Trim-Tex 847 spray adhesive to the back of the bead and then to the drywall. Immediately apply to the corner. The spray must still be wet to allow you to easily position the bead. Once in position, press the mud leg into place using the Trim-Tex Installation Tool. This ensures the bead will properly bond to the wall. Go back a second time to press the legs into place once the adhesive has tacked up. Staple the mud leg every 6-10" with 1/2" long divergent staples.
Finish: Apply multi-purpose joint compound as a first coat and then finish as any L Bead. Always caulk all corners and butt joints.