| Print This Page |
|
Trim-Tex once again breaks new ground with the introduction of Chamfer Bead. If you’re tired of square corners, but like straight sharp lines, then Chamfer Bead may be exactly what you’re looking for. The chamfered edge softens the room while maintaining the crisp look of a square corner. The rigid vinyl corner is also safer than a sharp square metal corner. Those who have tried Chamfer Bead are calling it the modern look for the new millennium.
|
|
|
Always striving to give you more choices, Trim-Tex introduces Chamfer Stop, the perfect complement to Chamfer Bead. Chamfer Stop is designed to be installed after the drywall. There is no need to wrap the bead behind the drywall. Use Chamfer Stop for creating beautiful multilayer drywall effects. Instead of wood moldings, Chamfer Stop is perfect for finishing windows and doors. If you can imagine it, Chamfer Stop can help you create it.
|
 |
|
|
|
|
The Chamfer 3 Way is designed to finish an outside corner where 3 Chamfer
Beads come together. Apply a little construction adhesive on the tabs
to bond the Chamfer 3 Way corner to the Chamfer Beads. 0940 is designed
for our standard Chamfer Bead and 0941 is for our new 350 Chamfer Bead.
|
|
|
The Chamfer Adapter is designed to be two products in one. Straight out of the box, it is ready to use to create a transition from our standard Chamfer Bead to a square outside corner to simplify baseboard installation. It can also be easily cut with a pair of snips along a marked score line to fit our new, smaller 350 Chamfer Bead. The Trim-Tex Chamfer Adapter is designed with a minimal mud bump which uses less compound and prevents excessive outward splaying of the baseboard.
|
|
|
Chamfer Marker allows you to cope 90º and 135º inside off angles quickly and easily. Lay the Chamfer Marker over Chamfer Bead or Chamfer Stop, make a pencil mark along the marking edge, snip with yellow aviation snips and you're done. You produce a perfect coped corner every time.
|
|
|
The 350 Chamfer Bead offers the same great look of our standard Chamfer Bead in a narrower, more subtle ¾" wide profile. The 350 Chamfer can be used on its own or combined with our other Chamfer products to create dramatic, never before seen designs. See pg. 33 of our photo section for stunning pictures utilizing this new product.
|
|
| 350 Chamfer Arch™ The crisp, modern look of a chamfered corner is now available in an arch version. The 350 Chamfer Arch is designed to perfectly match our new 350 Chamfer Bead. The Trim-Tex exclusive patented design does not require filling notches on the exposed area of the bead, making the 350 Chamfer Arch quick and easy to finish.
|
|
| Chamfer SPLAYED™
|
|
| 350 Chamfer SPLAYED™ Take the great look of Trim-Tex Chamfer Bead to all of your corners. Our 350 Chamfer Bead is now available in a splayed version to fit standard 135º outside corners. |
|
