350 Bull 2 Way Corner
350 Bull 3 Way Corner
350 Bull Off Angle 3 Way

350 Bull 2 Way Corner
Designed to finish two 350 Bull Corners that adjoin at a 90º angle. Apply a little construction adhesive on the tabs to bond the 350 Bul

350 Bull 3 Way Corner
Designed to finish three 350 Bull Corners that adjoin at a 90º outside angle. Apply a little construction adhesive on the tabs to bond the 350 Bull 3 Way corner to the 350 Bull Corner Beads. The ultimate in butt edge separation protection.

350 Bull Off Angle 3 Way
Designed to finish two 350 Bull Corners and one 350 Bull Splayed Outside Corner that adjoin at 135º outside off angle corner. Apply a little construction adhesive on the tabs to bond the 350 Bull Off Angle 3 Way corner to the 350 Bull & Splayed Bull Corner Beads. The ultimate in butt edge separation protection.

350 Bull L Bead Inside Corner
350 Bull L Bead Outside Corner

350 Bull L Bead Inside Corner Designed to finish two 350 Bull L Beads meeting at a 90º inside corner. Great for layering applications.

350 Bull L Bead Outside Corner
Designed to finish two 350 Bull L Beads meeting at a 90º outside corner. Great for layering applications.

350 Bull Splicer

The Bullnose Splicer is designed to join 2 sections of 350 Bull Corner Bead. Unique spring action allows the Splicer to be snapped into the bead for perfect alignment. To eliminate cracking at butt joints apply adhesive such as Miracle DSA-20 or Liquid Nail to the inside of both beads and snap in the 350 Bull Splicer.

350 Bull Adapter

The 350 Bull Adapter joins to a 350 Bull Bead and transitions to a standard sharp outside corner to simplify the installation of baseboard. Unlike over the bead adapters, Trim-Tex Bull Adapters are designed with a minimal mud bump which uses less compound and prevents excessive outward splaying of the baseboard.