3/4" R. Bullnose Splicer

The Bullnose Splicer is designed to join 2 sections of 3/4" R. Bullnose Corner Bead. Also works when joining straight and Archway Bullnose. Uniquely engineered spring action allows the Splicer to be snapped into the bead, allowing you to align the two Bullnose Beads perfectly.

0903 3/4" R. 2 Way
0904 3/4" R. 3 Way

0903 is designed to finish 2 Bullnose Outside Corners that adjoin at a 90º angle.
0904 is designed to finish 3 Bullnose Outside Corners that adjoin at 90º outside angles.

0905 3/4" Inside 3 Way
0911 3/4" Off Angle 3 Way
0912 3/4" Off Angle 2 Way

0905 is designed to finish 3 Bullnose Inside Corners that adjoin at 90º inside angles.
0911 is designed to finish 2 Bullnose Outside Corners and 1 Splayed Outside Corner adjoining at an outside off angle corner.
0912 is designed to finish 2 Bullnose Outside Corners that adjoin at a 135º angle.

0917 3/4" Bulladapter
0937 3/4" Bulladapter

0917 joins to a 3/4" Bullnose Outside Corner and transitions to a square bottom corner to simplify the installation of baseboard.
0937 joins a 3/4" Splayed Bullnose Outside Corner and transitions to a splayed square bottom corner to simplify the installation of baseboard.

J Round Corners

Inside and Outside Corners
Inside and Outside Corners match 2 Bullnose J Rounds joined at 90º inside or outside angles.